InnoGear Microphone Stand for Blue Yeti - Adjustable Boom Arm with Accessories

Product FAQ:

Q: Is the shock mount compatible with Blue Yeti?
A: No, the shock mount is not compatible with Blue Yeti.

Q: What is the max load bearing capacity of the stand?
A: The default set has a max load bearing capacity of 3.3 lb, but it can be lifted up if you set the spring to the second hole.

Q: What microphones is the mic clip suitable for?
A: The mic clip has a max diameter of 1.3"/32mm and is suitable for microphones like Shure SM58 and Samson Q2U.

Q: Does the package come with cable ties?
A: Yes, the package includes 5 cable ties for cord management.

Q: Will this arm stand work with AT2020 mic?
A: Yes, it is compatible with AT2020 mic.

Q: Is the stand and shock mount fit for Apogee hypermic microphone?
A: We recommend another set B08BYCNTPC/ B08747QB9P as they come with a 1/4'' adaptor for Apogee hypermic microphone.

Q: Can you use Presonus M7 with this shock mount?
A: The shock mount is tiny and plastic. It may not be suitable for Presonus M7.

Response:

The InnoGear Microphone Stand kit includes a double-braced arm mic stand, a professional dual-layered wind pop filter, and an anti-vibration shock mount. The high-quality shock mount fits for microphones with an outer diameter of 35-52mm (Not fit for Blue Yeti). The suspension boom scissor arm stand is fully adjustable in all parts, enabling you to adjust the suitable angle and height to show your perfect voice. The upgraded table clamp can firmly hold the microphone stand on the desk without any scratches when you swivel it. The package comes with 5 cable ties for putting your microphone cable in order. The mic set includes one mic clip, whose max diameter is 1.3"/32mm and is suitable for microphones like Shure SM58, Samson Q2U. Also, the package includes a 3/8" to 5/8" screw adapter that works greatly with Blue Yeti, Blue Snowball, and HyperX QuadCast, etc. However, the shock mount is not compatible with Blue Yeti. The max load bearing capacity of the stand is 3.3 lb with the default set, but it can be lifted up if you set the spring to the second hole. This kit is compatible with AT2020 mic and Samson C01. For Apogee hypermic microphone, we recommend another set B08BYCNTPC/ B08747QB9P as they come with a 1/4'' adaptor. The shock mount is tiny and plastic, so it may not be suitable for Presonus M7.