User Manual for EUFAB 11510 Jake Bike Carrier

Product Overview

The EUFAB 11510 Jake is a robust bike carrier designed for secure transportation of up to two bicycles, including electric bikes, on a vehicle's trailer hitch. It features a quick-release, lockable mechanism, and is suitable for oversized and Y-frame bicycles up to Ø6 cm. The carrier comes partially pre-assembled and is equipped with lockable frame holders and ratchet straps.

Assembly Instructions

1. Remove all parts from the packaging and check for any damage or missing components.
2. Attach the wheel rails to the base frame using the provided bolts and tighten securely.
3. Connect the lighting system to the base frame and secure the wiring with zip ties to avoid any loose cables.
4. Fit the license plate into the holder, ensuring it is visible and secure.
5. If your vehicle has a 7-pin lighting connector, use the appropriate adapter to connect to the carrier's 13-pin connector.

Mounting Instructions

1. Place the carrier onto the trailer hitch ball of your vehicle.
2. Adjust the position on the ball and push the fitting lever down firmly to secure the carrier.
3. Lock the lever with the provided key to prevent theft.
4. Load your bicycles onto the carrier, starting with the heaviest bike closest to the vehicle.
5. Secure the bikes using the lockable frame holders and tighten the ratchet straps around the wheels.
6. Use the additional safety strap to further secure the bikes if necessary.

Operating Instructions

1. To access your vehicle's trunk with the bikes loaded, press the release pedal to tilt the carrier away from the vehicle.
2. Ensure the carrier is locked into place before driving.

Troubleshooting Tips

• Carrier does not secure to hitch ball: Check that the hitch ball is clean and the correct size. Adjust the position of the carrier and apply more pressure to the lever.
• Lock pops out when unlocked: This can happen occasionally. Simply reinsert the lock into the lever and ensure it is secure before locking again.
• Bikes do not fit: Adjust the positions of the frame holders and ensure that the wheel straps are in the correct place. For longer wheel-base bikes, ensure they are within the carrier's size limitations.
• Lighting system issues: Check that all connections are secure and that the bulbs are correctly fitted. Replace any damaged bulbs.

Frequently Asked Questions (FAQ)

Can this carrier handle two electric bikes?

Yes, the EUFAB 11510 Jake is designed to carry two electric bikes. Just ensure the combined weight does not exceed the maximum load capacity of 60 kg.

Is the carrier suitable for bikes with wider tires?

The carrier can accommodate tire widths up to 2.2 inches. Make sure your bike tires are within this specification.

How do I secure the bikes to the carrier?

Bikes are secured using the lockable frame holders and the ratchet straps for the wheels. Make sure all locks and straps are tightly fastened before travel.

What should I do if the lighting system is not working?

Check the connections between the carrier and your vehicle's lighting system. Ensure that the correct adapter is used if your vehicle has a 7-pin connector. If the issue persists, check the bulbs and replace them if necessary.

How can I access the trunk of my vehicle with the bikes on the carrier?

The EUFAB 11510 Jake features a tilt mechanism. Press the release pedal to tilt the carrier and bikes away from the vehicle, allowing trunk access.

Can the carrier be locked to prevent theft?

Yes, the fitting lever has a lock to secure the carrier to the hitch ball, and the frame holders also have locks to secure the bikes to the carrier.

What is the spacing between the bike rails?

The spacing between the bike rails is approximately 20 cm, which allows for adequate space between mounted bikes.

Is this bike carrier easy to install?

Yes, customers report that the EUFAB 11510 Jake is easy to install, with a partially pre-assembled design and a quick-release mechanism for attaching to the hitch ball.

Q: Is the EUFAB Porte-vélos 11510 JAKE suitable for electric bikes?
A: Yes, the EUFAB Porte-vélos 11510 JAKE is specifically designed to be suitable for electric bikes.

Q: Is the bike carrier preassembled?
A: The EUFAB Porte-vélos 11510 JAKE is partially preassembled, which makes it easier to install.

Q: How many bikes can the carrier hold?
A: The EUFAB Porte-vélos 11510 JAKE can hold up to 2 bikes.

Q: Can the carrier be locked?
A: Yes, the EUFAB Porte-vélos 11510 JAKE has a quick-release locking mechanism to securely lock the bikes in place.

Q: What is the maximum weight capacity of the carrier?
A: The EUFAB Porte-vélos 11510 JAKE has a maximum weight capacity of 60 kg.

Q: What is the maximum tire width that can fit in the rail?
A: The EUFAB Porte-vélos 11510 JAKE can accommodate tires with a maximum width of up to 2.2 inches.

Q: What is the spacing between the rails?
A: The spacing between the rails of the EUFAB Porte-vélos 11510 JAKE is approximately 20 cm.

Q: What is the weight of the carrier?
A: The EUFAB Porte-vélos 11510 JAKE weighs approximately 17 kg.

Q: Is there any additional information about the product?
A: The EUFAB Porte-vélos 11510 JAKE is compatible with oversized bikes and Y-frame bikes up to Ø6 cm. It also comes with frame-lockable supports and ratchet straps for securing the bikes.