Dayton Audio T652 Dual 6-1/2" 2-Way Tower Speaker Pair User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Dayton Audio T652 Dual 6-1/2" 2-Way Tower Speaker Pair. These speakers are designed to deliver powerful, clear sound with deep bass and exceptional detail. Please read this user manual carefully to ensure proper setup and usage of your new speakers.

2. Package Contents

• 2 x Dayton Audio T652 Tower Speakers
• 2 x Removable Fabric Speaker Grills
• User Manual

3. Speaker Placement

Proper speaker placement is essential for optimal sound quality. Follow these guidelines for best results:

• Place the speakers on a flat, stable surface.
• Position the speakers at least 2 feet away from walls and other large objects.
• For stereo listening, place the speakers at an equal distance from your listening position and angle them slightly inward.
• For home theater setups, place the front left and right speakers at an equal distance from your listening position and angle them slightly inward. The center speaker should be placed directly above or below your TV or screen.

4. Connecting the Speakers

Before connecting the speakers, ensure that your amplifier or receiver is turned off to avoid damage to your equipment.

1. Locate the spring-loaded speaker terminals on the back of each speaker.
2. Strip approximately 1/2 inch of insulation from the ends of your speaker wire.
3. Insert the positive (typically red or marked with a "+" symbol) speaker wire into the red terminal and the negative (typically black or marked with a "-" symbol) speaker wire into the black terminal. Press down on the terminal tab to open the hole, insert the wire, and release the tab to secure the wire in place.
4. Connect the other ends of the speaker wires to the corresponding terminals on your amplifier or receiver.

5. Troubleshooting Tips

If you encounter any issues with your speakers, try the following troubleshooting tips:

• Ensure that your amplifier or receiver is turned on and set to the correct input source.
• Check that all speaker wires are securely connected to the speakers and the amplifier or receiver.
• Verify that the speaker wires are connected to the correct terminals (positive to positive, negative to negative).
• If you experience distortion or poor sound quality, try reducing the volume on your amplifier or receiver.
• If one speaker is not producing sound, swap the speaker wires between the left and right speakers to determine if the issue is with the speaker or the amplifier/receiver.

6. Frequently Asked Questions

Q: Can these speakers be used with a 4-ohm receiver?

A: Yes, the Dayton Audio T652 speakers are compatible with most receivers rated from 4 to 8 ohms.

Q: Are these speakers magnetically shielded?

A: The T652 speakers are likely not magnetically shielded and may cause interference with some TV remotes or other electronic devices. Keep them at a safe distance from these devices to avoid interference.

Q: Can I use these speakers without the grills?

A: Yes, you can use the T652 speakers without the grills. Some users find that they sound better without the grills.

Q: What is the difference between the T652 and T652-AIR models?

A: The T652-AIR model features an Air Motion Transformer (AMT) tweeter, which provides improved high-frequency response and detail compared to the standard T652 model. The T652-AIR is also slightly more expensive.

Q: Can I use these speakers as surround sound speakers?
A: Yes, you can use these speakers as surround sound speakers. It is recommended to have the surrounds be as equal to the fronts as possible. A system with 4 or 6 of these surrounding you would sound awesome!

Q: How many watts RMS?
A: The RMS power output for the Dayton Audio T652 is 90 watts, and the max is 150 watts into 6 ohms.

Q: Can Dayton T625 Speakers be used with a 110 watt a channel tuner?
A: Yes, you can use Dayton T652 Speakers with a 110 watt a channel tuner.

Q: Do these speakers have a lot of bass?
A: These speakers are not top of the line or anything, but combined with the rest of my speakers (one front, two back) definitely get all the bass I want.

Q: Are these good with the Lepai LP-2020A+ Amplifier?
A: It is recommended to use them with an amplifier with a bit more power like the Dayton Audio DTA-120.

Q: I need a cheap receiver/amp that would work with these speakers. Any suggestions? Can I use any receiver?
A: Yes, you can use any home receiver. A Yamaha RXV-383 would be perfect for them. Just don't underpower them with a cheap receiver if you like loud music. Less clipping.

Q: So my Onkyo TX DS555 5.1 channel AV receiver will supply enough power for these speakers? I don't ever play my music too crazy loud.
A: Yes, your Onkyo TX DS555 is going to power them real well.

Q: Can these speakers be used with an Onkyo receiver HT-R395 that has speaker impedance of 6-16 ohms?
A: Yes, they can be used with an Onkyo receiver HT-R395. The short answer is yes. The long answer is it may not be a perfect match but most of the time consumers don't have a perfectly matched receiver and speakers. You will be able to use them. You'll be able to turn it up to a decent level. What no one can tell you is at what point will it start to distort. The better matched, the more power you can get out of the system without distortion.

Q: Can these be used as full-range rear speakers? Need something slimmer than what I have. Also need to know if these connect via standard speaker wire.
A: Yes, they can be used as full-range rear speakers. They connect with standard speaker wire.

Q: What's the RMS wattage?
A: The RMS power output for the Dayton Audio T652 is 90-150 watts.

Additionally, customers have reported that these speakers provide exceptional clarity and detail in this price class, while also delivering powerful bass punch. They are recommended for use as tower speakers in larger listening spaces, but won't overwhelm more intimate settings due to their slim-profile tower cabinet. The ported bass-reflex design delivers extended, deep bass down to 45 Hz, and the black ebony pica vinyl cabinet finish provides a clean modern look. Overall, these speakers are highly recommended for their excellent sound quality and affordability.