FACOM 006025 Décalaminage Moteur Intégral Diesel User Manual

Instructions for Use

1. Ensure your diesel vehicle's fuel tank is nearly empty before treatment.
2. Shake the bottle of FACOM 006025 Décalaminage Moteur Intégral Diesel thoroughly to mix the contents.
3. Open the fuel tank and prepare to pour the additive. If the bottle's cap is difficult to open, use a tool such as a pair of pliers or a screwdriver to assist in opening.
4. If the bottle does not have a spout, use a clean funnel to pour the liquid into the tank to avoid spillage. A bent or angled funnel can be particularly helpful.
5. Pour the entire contents of the 1L bottle into the fuel tank.
6. Immediately fill the tank with diesel fuel to ensure proper mixing.
7. Drive your vehicle on a highway or open road where you can maintain a high engine RPM (ideally between 50 to 100 km) to facilitate the cleaning process.
8. Continue to drive normally, and you should notice improvements such as reduced smoke emission and smoother engine performance within 50 to 100 km.
9. For best results, combine this treatment with an engine oil flush using a pre-drain product and lower quality oil, repeating the process up to 5 times if necessary.

Troubleshooting Tips

• Difficulty opening the bottle: Use a tool like pliers or a screwdriver to carefully open the cap.
• Spillage during pouring: Always use a funnel, preferably with a bent neck, to pour the additive into the tank.
• Residue left in the bottle: To ensure all the liquid is used, consider cutting the bottom of the bottle or using a bent funnel to reach into the corners.
• No noticeable improvement: Ensure that the driving conditions post-treatment are ideal for the product to work effectively, such as maintaining high RPMs on a highway.
• Vehicle still exhibits issues: If problems persist, consult a professional mechanic as there may be underlying issues that the product alone cannot resolve.

Frequently Asked Questions (FAQ)

How often should I use this product?

It is recommended to use FACOM 006025 Décalaminage Moteur Intégral Diesel every 20,000 to 30,000 km or before a technical inspection.

Is this product compatible with all diesel engines?

Yes, it is compatible with all diesel injection systems (Common rail, injector pumps) and all pollution control systems.

Can this product help with technical inspections?

Yes, it can facilitate passing technical inspections by helping to reduce pollutant emissions and restoring optimal engine functionality.

What should I do if the product does not improve my vehicle's performance?

If there is no improvement, it may be necessary to consult a professional mechanic for a more thorough assessment of your vehicle's condition.

Is a spout or funnel included for pouring?

No, a spout or funnel is not included. It is advisable to have a funnel, preferably a bent one, for ease of pouring without spillage.

How do I know if the product is working?

You should notice a reduction in smoke emissions, improved engine performance, and potentially better fuel economy after proper application and driving conditions.