Newentor Weather Station Wireless Indoor Outdoor Multiple Sensors User Manual

Table of Contents

1. Package Contents
2. Setting Up the Weather Station
3. Mounting the Remote Sensors
4. Using the Weather Station
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Package Contents

• 1 x Indoor Station
• 3 x Outdoor Sensors
• 22 x Label Stickers
• 1 x User Manual

2. Setting Up the Weather Station

1. Insert 2 x AA batteries (not included) into the indoor station.
2. Select the correct time zone for your location (-8 PST, -7 MST, -6 CST, -5 EST) using the buttons on the indoor station.
3. Wait for the radio clock to automatically search for the WWVB signal. This may take a few minutes.
4. Once the time is synchronized, set the dual alarm clocks if desired.

3. Mounting the Remote Sensors

1. Insert 2 x AA batteries (not included) into each of the three remote sensors.
2. Mount the sensors vertically on a North-facing wall or a well-shaded location to avoid direct sunlight and rain. Recommended: 6 inches below eaves or placed under deck rail.
3. Use the provided label stickers to indicate the corresponding detection location for each sensor.

4. Using the Weather Station

• The weather station will display indoor and outdoor temperature and humidity, atomic clock, alarm clock and snooze mode, weather forecast, air pressure trend, and record max/min temperature and humidity.
• Monitor the temperature and humidity of up to 4 locations around your house in real time.
• Refer to the comfort level indicator to maintain a comfortable and healthy living environment (68-82°F and 40-70% humidity).

5. Troubleshooting Tips

• If the remote sensors are not connecting to the indoor station, try moving the sensors closer to the indoor station or removing obstacles between them.
• If the temperature readings seem inaccurate, ensure the sensors are mounted in a shaded location and away from heat sources.
• If the screen is difficult to read, adjust the viewing angle or ensure the screen is not in direct sunlight.

6. Frequently Asked Questions

Q: How far can the remote sensors be placed from the indoor station?

A: The remote sensors can be placed up to 200 ft (60m) away from the indoor station in open areas. Obstacles such as walls or floors may reduce this range.

Q: Can I use more than three remote sensors with this weather station?

A: No, the weather station is designed to work with a maximum of three remote sensors.

Q: How do I switch between Fahrenheit and Celsius?

A: Use the buttons on the indoor station to switch between Fahrenheit and Celsius temperature readings.

Q: Are batteries included with the weather station and remote sensors?

A: No, batteries are not included. You will need a total of 8 AA batteries (2 for the indoor station and 2 for each remote sensor).

Q: Can the display be wall mounted or only table stand?
A: The sensors have slots to wall mount, but the display does NOT.

Q: Will the main unit pick up the signal of 2 units which are within 200 feet, but under the house in a crawl space?
A: Yes. We have one of the 4 sensors in our crawl space, and it works fine. On setup, you have to have patience as it can take each sensor a few minutes to register on the main unit.

Q: Is it Alexa compatible?
A: No.

Q: Does this include a power cord? Yes or no? Also, can the unit be mounted on a wall? If not, does it have a kickstand on the back?
A: The main unit and remote sensors are battery-powered, and battery life is good. So no power cords. Yes, I added a hook to the back so it could be wall-mounted.

Q: How do you program an alarm?
A: Page 8 and 9 in your instruction manual has step by step to set and change the alarm. I have not set an alarm myself.

Q: Will the clock work abroad without WWVB signal?
A: You can disable the time signal reception and set the clock manually if you'd wish.

Q: How do I go about getting more stickers?
A: Dear Customer, Thanks for your question. Sorry that we didn't sell the sticker solely. Maybe you could use sticky notes if you need more stickers. If there are any other questions that we can help with, please let me know, we are always here. If there are any problems, please feel free to contact us through Amazon() or Email: [email protected]. We always are here to provide a solution and support for our customers. Newentor Team.

Q: Can the displayed date be changed in the settings to month day i.e. 1m 30d instead of day month i.e. 30d 1m or are you stuck with day month?
A: Pretty sure you're stuck with the default ordering.

Q: Are you able to program a name for each sensor, or can you only choose from a list of presets?
A: They are pre-identified on the screen. They furnish stick-on labels that are sufficiently detailed as to easily identify each sensor. Well thought out, and I am very satisfied.

Q: Does the unit display barometric pressure in inches of mercury?
A: Yes, it does show BP in inches of Mercury.

Overall, the Newentor Weather Station is a great device for monitoring temperature and humidity in multiple locations around your home. It comes with three remote sensors that can be placed up to 200 feet away from the main unit, and it displays the temperature and humidity of four places on the screen. The weather forecast function calculates personalized forecasts based on barometric pressure trends, and the atomic clock and dual alarm help manage your time better. The device is easy to set up and view with a large screen, but it runs completely on batteries (2 x AA, not included). The product FAQ covers important questions about mounting options, alarm programming, sticker availability, and more.