DYNASTY PROAUDIO WSA-5RP Wireless Rear Speakers Kit - 50W Amplifier, Dual Band, Auto Channel Switching.

Q: What is the wireless technology used in the DYNASTY PROAUDIO WSA-5RP Wireless Surround Sound Rear Speakers Kit?
A: The DYNASTY PROAUDIO WSA-5RP uses the latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability.

Q: How does the DYNASTY PROAUDIO WSA-5RP connect to an A/V receiver system?
A: The DYNASTY PROAUDIO WSA-5RP comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp.

Q: Does the DYNASTY PROAUDIO WSA-5RP have a built-in amplifier?
A: Yes, the DYNASTY PROAUDIO WSA-5RP has a high efficiency amplifier built-in, with 2 x 50W RMS @ 4 ohms load Class D amplifier, allowing you to connect directly to any passive bookshelf or rear surround sound loudspeakers.

Q: Can I connect an additional subwoofer to the DYNASTY PROAUDIO WSA-5RP?
A: Yes, the DYNASTY PROAUDIO WSA-5RP provides an additional subwoofer mono input and output for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier.

Q: What is the transmission range of the DYNASTY PROAUDIO WSA-5RP?
A: The DYNASTY PROAUDIO WSA-5RP has a wide transmission range of up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio.

Q: Is the DYNASTY PROAUDIO WSA-5RP FCC or CE certified?
A: Yes, the DYNASTY PROAUDIO WSA-5RP has FCC ID certification.

Q: Can I use the DYNASTY PROAUDIO WSA-5RP to create a 7.1 surround sound system?
A: Yes, you can install two sets of the DYNASTY PROAUDIO WSA-5RP to create a 7.1 surround sound system.

Q: How do I eliminate popping noises from the DYNASTY PROAUDIO WSA-5RP?
A: If your AV receiver is sending too much power to the transmitter, then that's what causes the popping or crackling noises. To get rid of the popping noises, raise the volume all the way up on the WSA-5RP’s wireless receiver output/amp end, then use your AV receiver’s auto calibration to adjust and lower the volume to the rear speakers. If your AV Receiver (or Preamp) allows individual level setting for each speaker, please try to decrease the preamp level output to the surrounds and raising he volume on the wireless receiver see if the problem can be solved.

Q: Does the DYNASTY PROAUDIO WSA-5RP have an auto standby power when the AVR is turned off?
A: Yes, the wireless receivers will turn to mute status once there is no audio signal detected on both transmitter/receiver.

Q: Can I connect 6 ohm speakers to the DYNASTY PROAUDIO WSA-5RP?
A: Yes, you can connect 6 ohm speakers to the DYNASTY PROAUDIO WSA-5RP.

Q: How do I fix issues with my wifi network when using the DYNASTY PROAUDIO WSA-5RP?
A: There may be a conflict with your 5GHz wifi. Switching the sound system from 5.8GHz (default) to 5.2GHz resolved the issue. On page 8 of the instruction manual, it says to short press the “M” button on the transmitter and receiver to toggle between 5.8GHz (blinking blue LED) and 5.2GHz (blinking green LED). Once both are showing the same color, long press “M” button again to confirm the selection. The lights should then show a solid (not blinking) LED.

Q: How do I control the volume on the DYNASTY PROAUDIO WSA-5RP?
A: The volume can be controlled by both the main AVR head unit or by the volume control knob on the DYNASTY PROAUDIO WSA-5RP unit, depending on what you’re trying to achieve.

Overall, the DYNASTY PROAUDIO WSA-5RP Wireless Surround Sound Rear Speakers Kit is an excellent wireless speaker kit for receivers without preamp outputs with lossless audio, low interference, and a wide transmission range. It has a built-in amplifier, additional subwoofer connection, and can be used to create a 7.1 surround sound system. However, popping noises may occur if your AV receiver sends too much power to the transmitter, which can be fixed by raising the volume all the way up on the wireless receiver output/amp end and using your AV receiver’s auto calibration to adjust and lower the volume to the rear speakers. Additionally, there may be issues with wifi network interference, which can be resolved by switching between frequencies or adjusting router settings.